Totoku LV32E2, Руководство пользователя

Страница: 10 / 56

- 8 -
ENGLISH
Software Installation and Setup
Follow the instructions below for software installation and display setup. See Q&A if any
trouble occurs.
Installing software
1
Start up the computer in VGA mode and turn on the display.
2
Confirm that the VGA boot screen appears followed by the Windows startup screen.
3
Log into Windows as a user with administrative privileges.
4
When the Found New Hardware Wizard starts up, cancel it .
Note: One of the following messages appears. Cancel the wizard properly according
to the message you see on your screen.
Welcome to the Found New Hardware Wizard (Windows 2000/XP): Click "Cancel."
Digital Signature Not Found (Windows 2000): Click "No" and "Finish."
Hardware Installation (Windows XP): Click "Stop Installation" and "Finish."
5
Insert the driver CD in the CD-ROM drive on your computer.
6
If not installed yet, install Microsoft .NET Framework 2.0 by running the following file
according to the on-screen instructions. This is required to display the PowerDesk-HF
menu.
DriverCD/Microsoft/dotnetfV20x86.exe
7
Select and install a display driver following the on-screen instructions.
Gray mode in landscape orientation: DriverCD/XP2K/Gray/Landscape/Setup.exe
Color mode in landscape orientation: DriverCD/XP2K/Color/Landscape/Setup.exe
Digital Signature Not Found (Windows 2000): Click "Yes."
Hardware Installation (Windows XP): Click "Continue Anyway."
Note: During installation, the display may black out. Please wait for a moment.
8
Restart the computer.
Display settings
Follow the instructions below after restarting the computer.
1
Log into Windows as a user with administrative privileges.
2
Confirm that the PowerDesk-HF icon is added in the taskbar.
Note:
• It takes more than 30 seconds for the icon to appear on the taskbar.
• When another graphics card coexists, the icon may not appear. In that case, select
the display connected to this card on the Settings tab in the Display Properties
dialog box.