Totoku LV22E4-N1, Руководство пользователя

Страница: 15 / 64

ENGLISH
- 1 -
5
Click "Advanced," select the Monitor tab, and check the refresh rate.
6
(Windows XP users) When two displays are connected, repeat Steps 2 to 5 for the
second display by selecting the second display ' s icon instead.
7
If necessary, change multi-display modes (see Chapter 4 for detailed information).
8
In a multi-display setup, check the display arrangement by clicking "Identify" on
the Settings tab. The same number as the selected display icon ' s appears on the
corresponding display. If necessary, rearrange the icons by dragging them to match
the actual display arrangement.
9
In a multi-display setup, determine a primary display, select the corresponding display
icon, check "Use this device as the primary monitor."
10
Click "OK," and remove the driver CD from the CD-ROM drive.
For all Windows Vista users
1
Double-click on the desk top, and click "Personalize." Click "Display Settings." Select
a display icon, and if the section below the icon says "Plug and Play monitor on Elza
TOTOKU LV22E4-N1/N16," the corresponding display is connected to LV22E4-N1/
N16.
In a multi-display setup, select the icon for the first display on this card and verify
"Extend my Windows desktop onto this monitor" is checked.
Set a resolution using the Screen resolution slider.
4
Select 32 bit color from the Color quality drop-down menu.
5
Click "Advanced Settings...," select the Monitor tab, and check the refresh rate (see
the table on the previous page). If necessary, select an appropriate refresh rate and
click "OK."