3
2
Finished wall surface
Finished floor surface
<Fixing bracket list>
Part No.
Name
Shape
Quantity
20 pieces
φ
6×30
T110D28
Resin plug
(Unit: mm)
(Unit: mm)
Wall-mounting screw positions
95
51
Finished wall surface
Finished wall surface
11.5
77
70
42
134
62
51
95
130
(94)
Cleanser
Alkaline
acid
cleaner
Thinner
CAUTION
Names of Parts
Checking the Accessories
Product Dimensions
Mounting Position
Fixing Bracket
(Optional Part)
Preparation for
Installation
■
Make sure that you have the following parts:
Core rod
Paper cutting plate
Accessory parts
Wall-mounting screw (flat head tapping screw
φ
4.5 x 30) 3 pieces
700
100
Mounting Method
■
How to set paper rolls
●
Wipe with a cloth dampened with appropriately-diluted neutral detergent,
and then wipe with a cloth dampened with water. After that, wipe off moisture
clean with a dry cloth.
Normal cleaning
●
After wetting a cloth with water or lukewarm water, wring it out thoroughly
and then use it to wipe the product.
Cleaning when the product is very dirty
Precautions for cleaning
Do not use the following things that can damage the surface of the product.
●
Acid cleaner, alkaline cleaner, and chlorine bleach
●
Solvents such as thinner and benzine
●
Cleaners containing rough particles such as cleanser and polishing powder
●
Nylon scrubbing brush, other brushes, etc.
Cleaning Method
How to Use
①
Mark hole positions in such a way that the product is
placed vertically.
Wall-mounting screw
(flat head tapping screw
φ
4.5 x 30): 3 pieces
*If the wall has uneven areas, use spacers (such as flat washers)
to secure a flat surface.
(Unit: mm)
②
Make prepared holes and fix the product using 3 supplied
wall-mounting screws (flat head tapping screw
φ
4.5 × 30).
■
Use the supplied wall-mounting screws for
installation.
Failure to do so could cause the installed
product to be unstable and drop, and may
result in injury.
■
Make sure that the product has no backlash
after the installation is complete.
If the product has backlash, it could come off or
the wall could collapse, which could result in
user’s fall and injury.
■
Use a plywood sheet that is 12 mm or
more in thickness on the mounting surface.
Failure to do so could cause the installed
product to be unstable and drop, and may
result in injury.
■
When the mounting surface is a thin wall,
mount a reinforcing wooden block that is
30 mm or more in thickness before
installation.
Failure to do so could cause the installed
product to be unstable and drop, and may
result in injury.
■
When the mounting surface is a concrete
base, use TOTO-designated fixing bracket
[Part No. T110D28 Resin Plug 20 pieces
(
φ
6 x 30, prepared hole:
φ
6)] or
commercially available plugs for concrete,
which is suitable for the mounting screws.
Failure to do so could cause the installed
product to be unstable and drop, and may
result in injury.
CAUTION
①
Lift the paper cutting plate.
②
Put the core rod through the paper roll, push-contract the core rod,
and set the paper roll on the paper holder.
③
Lower the paper cutting plate.
