Toto TBW01008B2, Руководство пользователя

Страница: 11 / 12

8 9
Faucet installation
1.Connect both ends ofthe shower hose with the body screw threads and shower
respectively
Tools to prepared before
Seal tape Screwdriver Wrensh Hex bar wrench
TBW01008B2 Installation
Confirmation before installation
Confirm that the water supply pipe is closed and the water circuit is cleaned
beforeinstallation
Read carefully the instructions for construction and conduct installation
according tothe main points for installation therein.
Confirm that the components you see in the packing box are identical to that
as shown in the figure below.
O-ring
Shower
Shower hose
Contain a gasket
Confirmation before installation
Confirm that the water supply pipe is closed and the water circuit is cleaned
beforeinstallation
Read carefully the instructions for construction and conduct installation
according tothe main points for installation therein.
Confirm that the components you see in the packing box are identical to that
as shown in the figure below.
TBW01031B Installation
Faucets instauation
O-ring
Joint
Fixing screws
plug cover
Shower support
Main shower body
Expansion tubes
Fixing screw
1. Shower support installation
①
Cut two holes vertically on the wall against the dimension of the mounting hole
on the shower support.
②
Drive expansion tubes in the holes. Remove the rubber plug in the opening
cavity of the shower support and install fastening screws in.
③
Put the shower support on the wall where holes were cut previously and then
use fixing screws to secure it. (Pay attention to ensuring a right direction)
④
Install the rubber plug in the shower support.
Attentions: Before installation, be sure to confirm the position
of the piping in the wall. Never damage the piping in drilling
and result in water leakage.
！