Toto TBW01003B1, Руководство пользователя

Страница: 8 / 11

3 4
1.
2.
3.
1.
2.
Attentions in construction and maintenance
Attentions
Maintenance
As the ceramic cartridge is a precise component,do not dismantle it without
authorization.Otherwise,such poor conditions as water leakage,etc. may be
caused.
Do not impact the product.Otherwise,failure,water leakage may occur.
With the product design being updated constantly,the physical object may not
coincide with the figure.However,the basic principle for installation,use is the
same.
To maintain a beautiful appearance of the product, the user is requested to
conduct maintenance and care in the following method.
Wipe with a piece of soft cloth frequently and use a piece of soft cloth dipped
in water to wipe from time to time.
When dirt exists obviously, please use water to wash sufficiently after wiping
with a neutral detergent.
Use condition and attentions in construction
Use condition
Warning
Cold water supply*hot water supply pressure:
Minimum pressure………………0.05MPa（flow pressure）
Maximum pressure………………0.75MPa（static pressure）
Recommended Operating pressure…………0.12MPa（flow pressure）
-0.5MPa（flow pressure）
The temperature for water supply is 4~60℃. It is suggested to use the temperature
below 60℃. Do not use steam to supply hot water.
The ambient temperature for use is 1~40℃. If the ambient temperature is lower
than 0℃, the faucet will deform and crack from freezing.
To prevent internal sprinkler damage, the water outlet temperature on the sprinkler
side shall not exceed 60℃. It is suggested to use a temperature below 45℃.
Being out of use for a long time may result in internal and external rust to the
faucet and being unable to be used.
If you want to scrap this product, do not treat it as you do for general household
garbage. Please follow relevant statutes to have it treated, recovered and collected
appropriately by an independent recovery system.
The product in these instructions has a cleaning function.
The hot water supply side of the faucet is in a condition of high temperature.
Do not allow skin to contact with the hardware surface directly. Otherwise,
scalding may occur.
Do not reverse cold*hot water pipes. Otherwise, scalding may occur.
Do not use steam to supply hot water. Otherwise, scalding may occur.
Tle water temperature will change when switch from spout to shower or switch
from shower to spout.The user should test it by hand.Otherwise, scalding may
occur.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
Attentions in construction
Warning: it means that ignoring this mark and misoperation may
cause serious personal injury and death.
Attention: it means that ignoring this mark and misoperation may
cause personal injury or property loss.