41
How to Use
Return
To use cold/hot water
Shower
Spout side
Shower side
(Open/Close)
changeover handle
Turn the
(open/close)
changeover handle up
to the upper limit.
Water comes out. At the highest position,
the flowrate becomes the maximum.
Spout
Turn the
(open/close)
changeover handle
downward.
Water comes out. At the lowest position,
the flowrate becomes the maximum.
Water stops coming out.
To stop cold/hot water
“Water hammering”
is a phenomenon that causes a loud “banging” sound.
It is not due to trouble with the faucet, but when the water is stopped suddenly.
However, this phenomenon may cause damage to piping and leak water.
Therefore, lower the lever handle slowly to avoid water hammering.
Point of
Main Unit
(Open/Close)
changeover
handle
Return the lever of the
(open/close)
changeover
handle to the point
position of the main unit.
Operate the handle slowly. In
some cases, you may incur water
hammering.
CAUTION
42
Maintenance
Care for the water discharge port
Loosen
Packing
Cap of discharged water port
Toothbrush
Cap of discharged
water port
(Ex.) Button,
medal, etc.
Groove
Using a tooth brush, etc.,
remove dust and dirt
accumulated in the cap of
the water discharge port.
2
Mount the spout cap and
packing.
3
Apply a round plate-like object
(button, medal, etc..) to the
groove of the spout and loosen it.
Remove the cap and
packing of the spout.
1
Groove is
directed
downward
*Pay due attention not to lose
parts during disassembly work.
*Pay attention to the direction
of the cap of the water discharge
port.
Do not use a thin-tipped
object like a flat-blade
screwdriver or the like.
Daily Care
For the best performance, esthetics and sanitary use, please clean the product
daily.
