1) Check to make sure your package includes the following parts:
2) Slide the original hinge bodies off the seat.
N OTE: The seat is upside down in all illustrations in this manual.
Please turn it right side up before installing the seat to the toilet.
3) Slide the new hinge bodies on the seat.
4) Insert the cross bar.
N OTE: The unpolished side of the cross bar should face away from the
seat.
5) Screw the crossbar into place.
6) Insert the seat stopper.
7) Check to make sure the new hinge bodies are
securely fastened.
Metal Hinge Bodies
(2 pieces)
Metal Cross Bar
Hex Wrench
Stainless
Steel Screws
(2 pieces)
Original Hinge Bodies
Original Hinge Bodies
New Hinge
Bodies
New Hinge
Bodies
Cross Bar
Screw
Screw
Hex Wrench
Seat Stopper
Rubber Seat Stopper
ENGLISH