10-1/4”
(260mm)
1-1/4”
(159mm)
1-1/8”
(30mm)
8-5/8”
(218mm)
6”
(152mm)
Water
Supply
Single Supply
Controller
2-3/8”
(60mm)
60
7-5/16”
(186 mm)
2” (50 mm) to
5” (127 mm)
~ 33”
(838 mm)
overall
length
Ø4x40
3 screws
with anchors
1-3/4”(45mm)
Faucet
6-5/8”
(168mm)
8-1/8”
(207mm)
2-3/4”
(70mm)
10-1/4”
(260mm)
1-1/4”
(159mm)
1-1/8”
(30mm)
8-5/8”
(218mm)
6”
(152mm)
Water
Supply
Single Supply
Controller
8
Please confirm the basin dimension of lavatory, to
which the faucet will be installed, making sure that it
has recommended minimum dimensions of
(L x W: 15" x 15").
Faucet Hole Diameter
Min. 28mm (~1-1/16”)
to
Max. 35mm (~1-3/8”)
Before Installing
1. Check the pressure of cold and hot water supply
2. Piping
3. Others
When the water supply pressure is higher than 125PSI (862kPa), be sure to
reduce the pressure within a range of 20 to 80 PSI by using a pressure
reducing valve available in the market.
Optimum working pressure range is from 14.5PSI to 125PSI (100kPa to
862kPa). Make sure the water pressure is within this range.
Flush all water lines prior to installation.
Pay special attention so that the sensor surface is not flawed or scratched.
Prepare stop valve and flexible hose or copper tube.
Do not place other devices using inverter or infrared sensor near the
Automatic Faucet, this may cause malfunction.
There is no problem with the Automatic Faucet if water remains inside.
Set-up Drawing
Some models may have different components as illustrated below.
Battery type
Ryohan™
Battery type
Helix™ Wall Mount