INSTALLATION MANUAL
AUTOMATIC FAUCET
Single supply faucet
Important Safeguards
(For your safety, please follow the instructions below.)
In this Instruction Manual, the following symbols are shown for safe and proper use
of your automatic faucet and in order to alert you to the possibility of personal injury
and damage to your property.
The symbols and their meanings are as follows.
Warning
Ignoring these symbols may cause
personal injury and/or property damage.
*Some models may have different components from the ones illustrated below.
Do not place the Automatic Faucet in a high humidity
area such as shower room or sauna.
This may cause damage.
Do not use in
humid area
Warning
Do not strike or kick the Automatic Faucet.
This may cause damage or water leakage.
Never attempt to disassemble, reassemble, repair
or modify the Automatic Faucet, unless you are an
electrician, or qualified service person.
This may cause property damage or personal injury.
Do not
disassemble
Do not strike
Specification
EcoPower
type
Model
number
Power supply
-
-
Battery life
Item
Detection range
from the sensor
5-1/8"~7-7/8" (130~200 mm)
sensor is self-adjusting
Water supply
pressure
minimum required water pressure:
14.5 PSI (100 kPa) ( Flowing)
maximum water pressure:
125 PSI (862 kPa)
check local building codes for maximum water
pressure allowed
Water supply connection
1/2" NPSM
RYOHAN™
TEL3GMY
Ambient temperature
32~104
o
F(0~40
o
C)
Humidity
Max. 90% RH
Flow rate
0.8 gallon per minutes (3 L/min.)
Duration of
water discharge
Discharge quantity
Max. 0.25 gallon per cycle (0.95 L/cycle)
60 seconds (TEL3 - 60)
Helix™ Wall mount
TEL3GW#CP
0GU3013ER
2007.03