25
24
* Example
When you want to save energy for 6 hours between 0:00 a.m. and 6:00 a.m. (while
your family is sleeping), press the
“
Timer
”
button at midnight.
●
The energy saving starts automatically at the same time and duration on every following day.
●
When the toilet seat is occupied during energy saving mode, the seat heater temporarily turns on. At this time,
the green "Power" lamp lights.
It takes about 15 minutes for the seat to warm up.
Note
Shutting Off Energy Saver Feature -
“
Timer ON/OFF
”
Press the
“
Timer ON/OFF
”
button on the remote controller until
“
Saving Time
”
indicators
in the remote control display go out.
●
The green
“
Power
”
lamp and the green
“
Seat
”
lamp on the main unit display light.
●
The seat heater turns on and energy saving stops.
Push
No indication
Back of the Remote Controller
Operation
Using the Energy Saver -
“
AUTO ON/OFF
”
The Neorest can be set to remember the times of day that you normally use the toilet, and will
automatically lower the temperature of the toilet seat to save energy when you do not expect to use the
toilet.
Press the
“
AUTO ON/OFF
”
button on the remote controller.
●
“
”
appears in the remote control display.
●
The
“
Energy Saver - Auto
”
lamp in the main unit display lights.
●
The main unit accepts the operation, and a beep sounds.
Dot appears
Push
Back of the Remote Controller
●
The seat temperature is set to about 79
°
F (26
°
C) while in Auto energy-saving mode; the seat will begin to warm
up when someone sits on it.
Note
●
During time periods when the toilet is not used much, the orange
“
Energy Saver - Auto
”
lamp on the
main unit lights.
The Neorest begins to detect the time periods during which the toilet is not used often.
(See Note).
The temperature of the seat is automatically
lowered, and the energy-saving mode begins
operating.
