Attentions in use and maintenance
Service conditions and attentions in use
Use condition
1. Cold water supply*hot water supply pressure
Minimum pressure
…………………
0.05MPa (flow pressure)
Maximum pressure
…………………
1.0MPa (static pressure)
2. The temperature for water supply is 4~90
℃
. It is suggested to use the temperature
of 60±5
℃
. Do not use steam to supply hot water.
3. The ambient temperature for use is above 0
℃
. If the ambient temperature is lower than
0
℃
,the faucet will deform and crack from freezing.
4. Being out of use for a long time may result in internal and external rust to the faucet
and being unable to be used.
5. If you want to scrap this product, do not treat it as you do for general household garbage.
Please follow relevant statutes to have it treated, recovered and collected appropriately by
an independent recovery system.
6. The product in these instructions has a cleaning function.
Attentions in using
Warning:it means that ignoring this mark and misoperation may cause serious
personal injury and death.
Attention: it means that ignoring this mark and misoperation may cause
personal injury or property loss.
Warning
1.Children are not allowed to use or can use only under the custody of adult. Such
special groups as the aged and disabled should be accompanied by those wife
behavioral competence when using it.
2.The hot water supply side of the faucet is in a condition of high
temperature. Do not allow skin to contact with the hardware surface directly.
Otherwise,scalding may occur.
3.Do not reverse cold*hot water pipes. Otherwise, scalding may occur.
4.Do not use steam to supply hot water. Otherwise, scalding may occur.
5.If a customer fails to use the self-contained water inlet filter net of our water
faucet,there is such a risk as water leakage or damage due to foreign matters
entering into the spool.
4
5
1. As the ceramic cartridge is a precise component, do not dismantle it
without authorization.Otherwise, such poor conditions as water
leakage, etc. may be caused.
2. Do not impact the product. Otherwise, failure, water leakage may occur.
3. It is imperative to use a neutral detergent cleaning.Other detergents
than a neutral one may damage the plating coat or make the surface
discolor.
4. Do not use any such detergent as acidic detergent and
abstergent,polishing powder.etc containing thick particles and nylon
brush.Otherwise,the plating coat may be damaged etc.
5. It is allowed to use a piece of soft cloth to wipe or use from time to time
a piece of cloth immersed in machine oil or vehicle wax to
wipe.However,do not contact with resin components.Otherwise,they
may lose the gloss and become rusty.
6. It is suggested not to leave it unused for a long time.Otherwise,this may
lead to intemal and external rust to faucets to such a degree that it
cannot be used any more,etc.
7. If water pressure disgorges a large pressure,please adjust the water
stop valve to attain the required flow to avoid water flow being too high
to splash out from the face wash basin.
8. With the product design being updated constantly, the physical object
may not coincide with the figure. However, the basic principle for
installation, use is the same.
9. As the manual of instructions is for common use,the existing product
models may not appear therein.However,the principle for
installation,use is the same.
Attentions
Maintenance
To maintain a beautiful appearance of the product, the user is requested to
conduct maintenance and care in the following method.
1. Wipe with a piece of soft cloth frequently and use a piece of soft cloth
dipped in water to wipe from time to time.
2. When dirt exists obviously, please use water to wash sufficiently after
wiping wife a neutral detergent.
