53
Freeze Damage Prevention
TCF9786WA only
Dynamic mode
This method runs the water for the bowl unit and wand automatically at a
fi
xed interval in order to prevent freezing.
■
How to Set
(Page 50)
Switch ANTI FREEZING to ON with the remote control.
(Flickering: green)
The toilet flushes
at intervals of
about 10 minutes.
Water comes out
from near the wand
at 5 minute intervals.
While ANT FREEZING is set to ON, it works as follows.
The POWER LED
fl
ashes.
The toilet
fl
ushes at intervals of about 10 minutes.
Aabout 50 ml of water comes out from near the wand at intervals
of 5 minutes. (The wand remains retracted.)
When the ambient temperature is likely to drop to 0°C (32°F) or lower, take measures to
prevent freezing.
Attention!
●
When the ambient temperature is likely to drop to 0°C (32°F) or lower, do not use the energy saver feature.
(May damage the product.)
●
Warm the bathroom or take measures against freezing so that the ambient temperature does not drop below
0°C (32°F).
●
Before starting work, set "AUTO FLUSH" (Page 42) and "AUTO OPEN/CLOSE" (Page 44) to "OFF".
Reference
Maintenance
Operation
Introduction
Reference
Maintenance
Operation
Introduction
D08781S_EN.indb 53
D08781S_EN.indb 53
11/12/2015 2:23:58 PM
11/12/2015 2:23:58 PM