manualshive.com logo in svg

Toto Link N300RH, Руководство пользователя

Поделиться
Скачать
Toto Link N300RH Скачать руководство пользователя страница 48

 

 47

 

 

Enable Dynamic Route 

You may want to set up your router to route computers or devices on your network to other 
local networks through other routers. If other routers support dynamic routing such as RIP 
(Routing Information Protocol), you can enable this feature on your router to automatically 
learn the required routes to reach those networks. It is required that the same dynamic 
routing protocol and version is also enabled on the other routers in order your router and 
the other users to exchange information about the network. Select the checkbox to enable 
Dynamic Route function. 

 

NAT: 

by default, this option is selected. Detailed information about this parameter refers to 

the discussion before.   

Transmit: 

allows your router to send out network information to other routers so other 

routers can dynamically build routes to your network.   

Disabled— 

disable sending routing information from your router to other routers. 

RIP1— 

sends out routing information to other routers using the RIP version 1 protocol.   

RIP2— 

sends out routing information to other routers using the RIP version 2 protocol.   

Receive: 

allows your router to receive network information from other routers so your 

router can build routes to other networks.   

Disabled— 

disable receiving routing information from other router to your router. 

RIP1— 

receive routing information from other routers using the RIP version 1 protocol.   

RIP2— 

receive routing information from other routers using the RIP version 2 protocol.

 

Enable Static Route

: this part allows you to specify that a specific target IP addresses 

passes through a determined gateway manually.   

Note: Configuring this feature assumes that you have some general networking knowledge. 

Содержание N300RH
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды