Toto Link IP04229, Руководство пользователя

Страница: 17 / 55

16
SSID ---Service Set Identifier used to identify your 802.11 wireless LAN should be specified
while operating in AP or AP+WDS mode. All the client devices within the range will receive
broadcast messages from the access point advertising this SSID.
Channel Width--- This is the spectral width of the radio channel. Supported wireless
channel spectrum widths:
20MHz is the standard channel spectrum width.
40MHz is the channel spectrum with the width of 40MHz (selected by default).
Control Sideband--- This function is to control the sideband of the radio channel.
Upper: By default, it is Upper, and the Channel Number is 11.
Lower: If you choose Lower, the Channel Number will change to Auto automatically
DQG\RXFDQ¶WFKDQJHWKH&RQWURO6LGHEDQGDWWKHVDPHWLPH7KHVHOHFWDEOH&KDQQHO
Number now will range from 1 to 9. Only when you choose other Channel Number you
will activate the Control Sideband again. If you choose Upper, the Channel Number
selectable will range from 5 to 13.
Channel Number--- this option provides selectable channel numbers.
5. For a secure connection, WPA2 Mixed is recommended for you to protect your network.
After all the above settings, please click Finish button, then page with below messages will
pop up:
When it turns back to the system status interface, you can see the Wi-Fi Configuration
Column, The Mode should be Local IP if you have setup Router mode successfully. The
numbers of connected clients will be shown here. Now you can surf Internet and enjoy the
best wireless experience brought by the router.