TALLY SYSTEM
- The tally system on the LCD-841DS is accessed via the DB-15
connector on the back of the unit labeled ‘TALLY’. The system works by closing the
contacts between the ground pin and the corresponding LED pin. The system is self
powered,
DO NOT GIVE POWER TO THE PINS
. The pinout is as follows:
TALLY
Green
Red
Yellow
GND
Monitor#1
#1
#2
#3
#4
Monitor#2
#6
#7
#8
#9
Features
High Resolution 800 × 600 pixels, 480,000 total
1 S-Video, composite video and SDI inputs per monitor with active loop through feature
1 VGA scalable input per panel
SDI Active loop through has active clock recovery with automatic 75 Ohm termination
2 High Resolution 10-bit SDI to composite video converters, (one per panel)
Scaler accepts resolutions 640×480, 800×600, 1024×768, 1152×864 and 1280×1024
Individual color, tint, brightness and contrast controls on menu screen
Built-in memory saves current setup when unit is powered down
Includes power supply
Three color, self-powered tally system provided for each panel
Built-in Color Bar Generator
Unique 90 degree tilt adjustment while mounted in rack
Dry Erase Marker for EZ Identifying of screen is included
<Specification>
Display (Viewing Area) : 8.4" (6.71" × 5.03")
Resolution (Pixels) : 800H × 600V
Dot Pitch : 0.213mm × 0.213mm
Brightness (in cd/m²) : 350 cd/m²
System : NTSC/PAL auto recognize
Inputs per panel : 1x S-Video, 1x Composite, 1x SDI, 1x VGA, RS-232
Outputs per panel : 1xS-Video, 1x Composite, 1x SDI, 1xD/A
Dimensions : 430W × 177H × 55D mm
Approx. Weight 6 lbs
Power Consumption 12 DCV, 3.0 Amps
Due to constant effort to improve products and product features, specifications may change without notice.
