Totem MINI SHOOTER, Инструкция по сборке

Страница: 45 / 48

TROUBLESHOOT
None of the LEDs are flashing when battery is
connected.
Battery voltage is low. Charge the battery.
LEDs are flashing when battery is not connected and
motors are spined manually.
This is normal behaviour and doesn’t indicate any
malfunction.
Servo motor doesn’t spin.
Servo motor connector may be plugged in upside down.
Flip it over.
First LED of light bar is flashing when battery is
connected.
Battery voltage is low. Charge the battery.
Wheel motors are twitching or decelerating while
driving.
Battery voltage is low. Charge the battery.
Wheel motor spin direction is incorrect.
• Check the Step 37 if motors are plugged correctly.
• Connect to Mini Shooter using Totem mobile
application. Go to “Settings” and switch “DC motor
pins” to “Inverted”. Write changes by clicking “Save”.
•
A button configuration may be wrong. Reinstall Totem
mobile application in order to reset all the settings.
Can’t connect to the Mini Shooter electronics board
with Totem mobile application.
• Check if Mini Shooter electronics board is powered on
(LEDs should blink).
• Only one device can be connected to the Mini Shooter
at a time. Reconnect the battery to reset the electronics
board or disconnect with another device.
• Check if your device is running the latest version of
Totem mobile application.
• Ensure that your device has Bluetooth functionality and
location service (GPS) enabled and Totem mobile appli-
cation has the location permission.
• Close Totem mobile application and run it again (restart).