TotalSeat A50, Руководство по эксплуатации

Страница: 9 / 12

8.Handle controller frame installation
Handle controller tray
Screw
Frame
Handle controller
frame assembly
Method Of Usage Method Of Usage
Ready for the handle controller tray, steel pole, take out the fixed screws on the handle
controller tray. (Figure 1)
Insert the ball joint of the steel pole to the concave spherical of the handle controller
tray.(figure 2)
( Figure 1) ( Figure 2)
Screw the screws in to the hole which got in step 1 and tighten it, take care the
direction, should be screw it from right to left. (Figure 3)
Prepare the cylindrical fixed pipe.(Figure 4)
( Figure 3) ( Figure 4)
15 14
( Figure 3)
( Figure 4)
( Figure 5) ( Figure 6
Joint the upper armrest, trumpet line in backrest and the air pipe. Make sure the
connection is well and without air leak(Figure 3).
After the connected air pipe and trumpet line, please surround the cable within
upper armrest. Do not fold any pipe or cable(Figure 4).
Surround
Air Pipe
Installation of decoration bar. Insert it into upper armrest cover slot. Lightly press
inward rim make it fit. Be careful of damage rim during installation(Figure 5).
Tighten decoration bar with supplied cross recessed pan head screws(Figure 6)
Insert
Lightly
press inward