4
5. Replace the lens and the lamp retaining ring onto the light
base. Make certain that the sealing ring is positioned correctly
between the lamp housing and the lens. Twist clockwise and
lock the plastic cover into position. Fig. 9
Fig. 9
6. Plug the transformer into a properly grounded electrical outlet.
Fig. 10
Fig. 10
TROUBLESHOOTING
•
If light fails to illuminate, check that it is getting power by testing another appliance in the same power
outlet.
•
The light is designed to turn on when it gets dark, and turn off when it gets light. To activate the light
during daylight hours, cover the sensor.
•
If the light will not illuminate, follow the instructions for “Replacing The Bulb”.
•
If light does not turn off during daytime, check sensor. Make sure the sensor faces up and is not
covered by dirt or debris.
CARE AND MAINTENANCE
•
Periodically, your light may require cleaning for optimal performance.
•
Cleaning should only be done with warm soapy water. Be sure to use biodegradable soap.
•
The frequency of cleaning depends upon the conditions of the environment where the light is used.
•
The light is designed to operate at temperatures between 20
0
F and 110
0
F.
Lamp retaining ring
Lens
GFCI