background image

 ITEM  # UW16200 

Fountain

 and Landscape Light Kit 

PACKAGE CONTENTS 

 WARNINGS AND CAUTIONS 

WARNING 

To reduce the risk of electrical shock, connect only to a properly grounded, grounding type receptacle
(GFCI).

Do not exceed the voltage shown on the transformer.

Do not submerge the transformer and sensor.

To reduce the risk of fire or injury, keep lamp away from materials that may burn.

Always disconnect light from the power source before beginning any maintenance or work on the light.

Inspect  cord  for  damage  before  installation  and/or  maintenance.  Replace  the  entire  light/transformer
assembly if damage is found.

CAUTION 

Light gets hot! - Do not touch the lens, guard, or enclosure until light is turned off and cool.

Turn light off and allow to cool before replacing the bulb.

Use a proper power source as indicated on the transformer label.

Keep the cord away from high temperatures or other heat sources.

Do not lift the light or the transformer by its power cord.

This light assembly is not intended for use in swimming pools or hot tubs.

Part 

Description 

Quantity 

Light 

Sensor 

Transformer 

Color lenses 

Questions, problems, missing parts? Before returning 
to your retailer, call our customer service department at  
1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday, or
email us at [email protected].  Or
visit our website www.total-pond.com.

Содержание UW16200






Отзывы: