![TotalPond DD11560 Скачать руководство пользователя страница 2](http://html.mh-extra.com/html/totalpond/dd11560/dd11560_quick-start-manual_1139186002.webp)
2
PREPARATION
Before beginning assembly or operation
of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
•
Estimated Assembly Time: 5 minutes
•
No tools required for assembly.
OPERATION INSTRUCTIONS
1. Connect tubing to the outlet of the pump with flow control and
coupler. Fig. 1
NOTE: Tubing is NOT INCLUDED.
Fig. 1
2. Place the pump into the water and connect to a proper power
source. Fig. 2
Fig. 2
3. Adjust the flow control to the preferred setting. Fig. 3
Fig. 3
CARE AND MAINTENANCE
•
Regular cleaning of the pump may be necessary depending upon the environment in which it is
operated. Clean the pump when it is visibly soiled or when a drop in performance is detected.
•
Before cleaning, always disconnect the pump from the power source.
•
Remove all parts from the pump and clean in warm, soapy water.
•
Disassemble the front cover and remove the impeller cover to expose the impeller assembly.
Remove the impeller assembly by gently pulling on the impeller blades. Use a soft cloth or brush
to clean the impeller assembly and the inside of the impeller housing.
GFCI
Tubing
Flow control
Pump
Coupler