6
7
Using your Revolution S
Shift between VT/TCR/VW/Clock Modes:
When powered on, press the power button 3 times consecutively, the first row will flash,
turn the adjustment switch to the right to cycle through the VT/TCR/VW/Clock modes.
VW Mode:
When in VW mode, turn the adjustment switch to the right or left to increase or decrease
the level of wattage respectively. The available wattage range is 1W – 80W in increments
of 1W.
VT Mode (Ni/Ti/SS316):
To shift between Ni/Ti/SS316, when in VT mode press the power button 3 times
consecutively, the first row will flash, turn the adjustment switch to the left and the Ni/Ti/
SS316 symbol will flash, turn the adjustment switch to the right to shift between the Ni/Ti/
SS316 modes. When in VT mode, turn the adjustment switch to the right or left to increase
or decrease the temperature respectively. The available temperature range is 100-315°C
or 200-600°F and can be adjusted in increments of 5°C and 10°F. To adjust the wattage
level whilst in VT mode, press the power button 3 times consecutively to activate the
menu, turn the adjustment switch to the left twice and the wattage (PWR) value will flash,
turn the adjustment switch to the right to adjust the wattage level.
To lock/unlock the atomizer resistance, press the power button 3 times in quick
succession to activate the menu, turn the adjustment switch to the left three times and the
atomizer value will flash, turn the adjustment switch to the right to lock/unlock the atomizer
resistance. Note: Only lock the atomizer when the coil is at room temperature.
Note: If a coil with a resistance exceeding 1.5ohms is applied in VT mode, the device
will automatically switch to VW mode. Also, if a standard kanthal coil is used under
VT mode, the device will automatically switch to VW mode.
TW_Revolution S Manual.indd 6-7
27/06/2016 14:45
