12
13
Replacing the Battery:
To replace the 18650 battery, simply
remove the battery cover on the back
of the device.
New Atomizer Installation:
When a new atomizer is connected or
the existing atomizer is disconnected and
reconnected, a message prompt may
be displayed – ‘New Coil Right, Same
Coil Left’.
Press the right
adjustment button to
confirm that a new
atomizer has been
connected, or the left
adjustment button to
confirm that the existing
atomizer has been
reconnected. Selection
of a new coil should
only be made when the
atomizer and coil are at
room temperature.
Short Circuit Protection:
If a short circuit occurs when the power
button is pressed, ‘atomizer short’ will
be displayed on the screen. Replace the
atomizer to continue.
Low Voltage Protection:
When the battery voltage is below 3.3V,
‘Battery Low’ will be displayed on the
screen. If following this message the
button is continually pressed, the message
‘Battery Low Lock’ will be displayed and
the device will not fire. Replace or recharge
the battery to continue.
Low Battery Alert:
When the battery reaches lower than
10% capacity, the power symbol on the
screen will flash continuously. Replace or
recharge the battery to continue.
Temperature Protection:
If the temperature of the device exceeds
70°C, the output will automatically cease
and the message ‘Device Too Hot’ will be
displayed. Allow to cool before use.
Using your GRIP VT75
Using your GRIP VT75
TW_GRIP_VT75_Manual.indd 12-13
09/11/2015 15:09
