Totally Wicked E-PIPE III, Руководство пользователя

Страница: 16 / 22

16
FILLING THE TANK & ADJUSTING THE AIRFLOW
Remove the tank from the E-Pipe 3 body by first removing the mouthpiece, twist
and pull to remove. Unscrew and remove the tank assembly from the E-Pipe 3
body. Unscrew the tank base and fill to just below the height of the central air
tube as shown in the diagram. Avoid allowing liquid into the central air hole. Screw
the tank base into the tank. To adjust the airflow to your personal preference,
rotate the airflow control ring located at the bottom of the tank base. The more
area exposed, the more open the air draw will be. Screw the tank back on to the
E-Pipe 3 body. Refit the mouthpiece by pushing firmly over the tank, being careful
to ensure correct orientation of the alignment tab.
FITTING THE BATTERY
To fit the battery, unscrew the battery cap at the top of the body. Insert the
battery into its housing negative side first, push the battery cap down and screw
back on. The LEDs will flash 3 times to indicate successful insertion.
USING YOUR E-PIPE 3