12
13
PRIMING THE ATOMIZER HEAD
It is important to “prime” a new atomizer head
before first use. Failure to do so can damage
the atomizer head.
Remove the tank from the arc Sigma battery
by unscrewing at the tank base. Turn the tank
upside down, then unscrew the tank base
from the glass section of the tank. Remove
the atomizer head by pulling straight out, drip
a few drops of e-liquid onto the cotton wick
through the openings on the sides of the
atomizer head, and push back into the tank.
Screw the base back onto the tank and refit
to the battery.
ATOMIZER HEAD LIFESPAN
Atomizer heads do not last forever and
need to be replaced periodically. Lifespan is
generally from a few days to several weeks,
depending on power used, vaping style,
flavour and type of e-liquid. A slight burnt
taste, general loss of vapour production,
or a reduction in flavour intensity can all be
indicators that the atomizer head requires
replacement.
FILLING THE TANK
Unscrew the top section of the GT Air Slim tank
and fill the tank through one of the apertures
either side of the central air hole. Do not allow
liquid to enter the central air hole. Refit the top
section of the tank.
Note:
To avoid leaking, ensure an air gap of
2mm remains above the e-liquid after filling.
After priming a new atomizer head and filling
the tank, it is recommended to wait 5 minutes
to ensure the atomizer head is fully saturated.
POWERING ON AND OFF
Press the power button 5 times in quick
succession to turn the arc Sigma on. To turn
the device off again, press the power button 5
times quickly.
SETTING THE CORRECT WATTAGE
The arc Sigma has adjustable wattage that
can be set from 1 - 40W. Use the adjustment
buttons on the battery to increase or decrease
the wattage. We recommend a wattage of 11W
with the supplied atomizer head but feel free to
experiment to find your favourite setting.
Tip:
Press and hold down either of the
adjustment buttons to make speedy changes
to the wattage.
USING YOUR ARC SIGMA
