background image

Electric Heat

— When the Electric Heat option in the advanced set up is

set to ON (configured by installer), the thermostat will turn on the fan im-
mediately any time there is a heat demand. This feature should only be used
on electric heating applications. Do not use with gas heat.

Holiday Mode

— When the thermostat is in Holiday mode, the thermostat

will operate under Unoccupied set points. To configure and activate the Holi-
day mode, press the Holiday button. The ‘‘HOL’’ icon will be displayed along
with the remaining days of Holiday mode operation. Press the UP or DOWN
ARROWS to select the number of days that the holiday schedule will be in
effect. A value of 0 disables Holiday mode. The duration can be set from 1
to 99 days. The thermostat will enter Holiday mode on midnight of the next
day after the mode has been activated. Holiday mode will remain in effect
until midnight of the last configured day.

If the Holiday mode is in effect, the number of days remaining will blink

on and off and the ‘‘Unoccupied’’ icon will be displayed. The Override but-
ton will be active during Holiday mode.

To turn off the Holiday mode before the remaining configured days have

passed, press the Holiday button to enter into the configuration mode. Press
the DOWN ARROW to set the number of days to zero. Holiday mode will
be disabled.

14

Содержание CPV220





















Отзывы: