TotalFlow Print Server R-60, Руководство по эксплуатации

Страница: 141 / 220

5
139
6. Go to [[M Miirrrroorr]] and select whether to mirror all the sheets in the job. The Mirror function applies to
the entire printing job, even if you set up a page range for the other options.
Changing the Watermark Settings
To access the watermark settings options:
1. Open [[JJoob b PPrroop peerrttiieess EEd diittoorr]].
2. Click [[W Wa atteerrm ma arrkk]] on the left side of the screen.
3. Use the options displayed to customize the watermark settings.
Adding a Watermark to the Job
1. Click [[W Wa atteerrm ma arrkk]] on the left side of the screen.
2. To specify the text displayed, enter the content in the text area or select a previously specified text
from the drop-down list.
3. Go to the [[FFoonntt]] section and select the name, color and size for the font displayed.
4. To rotate the text 90 degrees, enter the value
90
in the [[A Anng gllee]] field.
5. To make the watermark opaque, leave the transparency percentage to
0
in the [[TTrra annssp pa arreennccyy]]
field.
6. To customize the position of the text relative to the center of the page, go to [[PPoossiittiioonn]] and enter
the amount you want to shift the watermark in the [[XX]] and [[Y
Y]] fields.
7. To print the watermark only on the first page, select the [[PPrriinntt oonn ffiirrsstt p pa ag gee oonnllyy]] check box.
Otherwise, the watermark is printed on all the pages in the job.
Changing the Watermark Settings