Feed roller instructions:
Notice:
Notice:
a
b
6.
7.
MIG/MAG
Wire diameter(mm)
CO2
Mixed gas(25%
CO2+75%Ar2
0.6
40-90A
25-90A
IMPORTANT!
Securely hold onto the end of the welding wire and keep tension on it
during the following steps.
If this is not done, the welding wire will unravel and unspool which can
cause tangling and feeding problems.
DANGER
PARTS MAY BE AT WELDING VOLTAGE
TO PREVENT ELECTRIC SHOCK AND DEATH
1. Keep hands away from wire feed mechanism.
2. Close door before plugging in, unless using cold wire feed to feed
wire through to gun.
3. Do not touch trigger while feeding wire through to gun.
9
