Total TSSLI2001, Руководство пользователя

Страница: 3 / 8

Instructions for use for the first use
1. Insert the battery into the mower's power connector.
2. turn on the mower's power switch. Due to first time use, the LEO display indicator
will be green and the buzzer will ring 1 time.
3. Double click the trigger, the mower blades will open automatically.
4. normal pruning : Press the trigger to close the blades and release the trigger to
open the blades.
blade closure : Keep pressing the trigger, a buzz means the blade will stay
closed.
5. Before operation, to see if the mower works well, press the trigger to class and
release the trigger to open the blades without cutting anything. Repeat up to here
a few times.
Saving Instructions
1. Press the trigger and hold it for a few seconds and then release it, the blade will
close and not open.
2. Power off battery, disconnect battery.
Attention
1. During charging, it is normal for the charger and battery to be warm.
2. If the battery is not used for a long time, it is recommended to charge the battery
once every 3months, this is to ensure that the battery is not affected by low usage.
3. For a new battery or a battery that has not been used for a long time, it will need
about 5 charging cycles before reaching its full capacity.
4. Do not recharge a fully charged battery only after a few minutes of use, this will
reduce battery life and efficiency.
5. Do not use a damaged battery and do not disassemble the charger or battery.
6. Do not put the battery near a high temperature heat source, the battery will
explode in the tire or prolonged exposure to a high temperature heat source.
7. Do not charge the battery in an outdoor or humid environment.
8. It is normal for the pruning shears to reduce the cutting diameter when the battery
capacity is running low.
9. Do not use the pruning shears while charging. It must be disconnected from the
battery when charging.
10. Do not store the battery in a humid environment.
Main switch
• long press 2 seconds to turn on the
machine
• Press once to change gear
• Long press 2 seconds to turn off the
machine
• Quickly press the trigger twice to activate the action
• Suspend work for a long time after inactivity, the machine also pulls the trigger twice to
activate the action
• The knife edge will remain closed after a long press of the trigger for 2 seconds, and the
trigger will be reactivated by pressing the trigger 2 times in a short time.
Trigger