Total TGT11356, Руководство пользователя, Страница: 7 / 14

7
3. Installing the spray lance to use
the spray gun
Put the spray lance on the gun and
rotate it until the two parts are
completely locked.
4. Connect the high pressure hose
to the spray gun
Connect the silver end of the high
pressure hose to the gun and turn the
nut as shown to secure the connection.
5. Connect the high pressure hose
to the water outlet.
Connect the other end of the high
pressure hose to the water outlet of the
machine and turn the black swivel end
piece as shown to secure the
connection.
6. Connect the garden hose to the
water inlet.
Connect the garden hose adapter
(female coupler) to the pressure washer
water inlet, then thread the garden hose
(male end) onto the garden hose
adapter.
Start up
Place the machine on a flat surface and plug the pressure washer into the mains.
Water supply
• For remote connection values, see nameplate.
•
Impurities in the water can damage the high pressure pump and accessories.
Fill the suction hose with water
Screw the suction hose onto the water connection of the machine and insert it into the
water source (eg rainwater canister).
Purge the device as follows before operation:
•
Turn the machine "ON/OFF"
•
Unlock the lever on the spray gun trigger.
•
Push the lever on the trigger of the spray gun, the device will turn on.
•
Let the device work (max. 2 minutes) until the water comes out of the gun
without bubbles.
•
Release the lever on the spray gun.
• Lock the spray gun lever.