can shatter during use and guard helps to reduce
chances of personal injury.
Unplug tool and place it upside down allowing easy
access to spindle. Remove any accessories on spindle.
Thread wire wheel brush onto spindle and tighten with
the wrenches.
When using wire wheel brush, avoid applying too much
pressure which causes over bending of wires, leading to
premature breakage.
•
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
•
Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
result.
The tool and its air vents have to be kept clean.
Regularly clean the tool's air vents or whenever the
vents start to become obstructed.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
1
2
1
2
1
2
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by TOTAL Authorized or Factory Service
Centers, always using TOTAL replacement parts.
MAINTENANCE
CAUTION:
Replacing carbon brushes
ACCESSORIES
CAUTION:
•
These
accessories
or
attachments
are
recommended for use with your TOTAL tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or
attachment for its stated purpose.
•
Your tool is supplied with a guard for use with a
depressed center grinding wheel, multi-disc, flex
wheel and wire wheel brush. If you decide to use
your TOTAL grinder with approved accessories
which you purchase from your TOTAL distributor or
factory service center, be sure to obtain and use all
necessary fasteners and guards as recommended
in this manual. Your failure to do so could result in
personal injury to you and others.
If you need any assistance for more details regarding
these accessories, ask your local TOTAL Service Center.
1. Brush holder
cap
2. Screwdriver
1. Commutator
2. Carbon brush
1. Exhaust vent
2. Inhalation vent
12
