Total TG111165, Руководство пользователя

Страница: 6 / 11

6
Set up
Installation of the auxiliary handle
• Loosen the handle locking screw counterclockwise.
•
Slide handle over neck of tool.
• Rotate handle around neck to desired position.
•
Tighten the locking screw clockwise to fix the handle.
•
If you are right handed adjust the handle as shown in the picture. If you are left-
handed, adjust the handle upside down.
Depth Gauge Installation
The depth stop can be used to set a constant depth for drilling. To use the depth gauge:
• Loosen the indicator locking screw by turning the auxiliary handle
counterclockwise.
• Insert the depth stop through the hole in the handle.
•
Slide the depth gauge to the required depth and tighten the locking screw by
turning it clockwise.
Drill bits and chucks
Before making any installation on the tool, remove the plug from the mains.
• Remove the chuck key from the key storage tab on the base of the drill handle.
•
Put the key into the chuck, turn it counterclockwise to disassemble/loosen the
chuck
auxiliary handle
locking screw