10
Fig 20
Note:
New line can be purchased from
any good garden or DIY center.
To rewind the spool with new line
(See Fig21 - 24)
Insert the line through a hole in the
spool and secure it. (See Fig21)
Fig 21
Snugly and evenly wind the cutting
line onto the spool in the direction of
the arrow on the spool until the line
builds up to the notches in the spool
rim. Do not overfill spool. (See Fig22 &
23)
Fig 22
Fig 23
Repeat to replace the other cutting
line.
Insert the line through the ‘brass’
holes on the spool holder, pull line out.
Push spool inwards against the spring
clip and then push spool cover firmly
downwards until it locks into position.
Follow the instruction on cutting the
line in ‘Preparing the trimmer for use’
section 4 before use. See Fig24
Fig 24
Note:
New line can be purchased from
any good garden or DIY center.
MAINTENANCE AND
STORAGE
1. Your trimmer requires no additional
lubrication or maintenance. There
are no user serviceable parts in your
trimmer.
2. Never use water or chemical cleaners
to clean your trimmer. Wipe clean with
a dry cloth.
3. Always store your trimmer in a dry
