Total TF2041506, Руководство пользователя

Страница: 4 / 11

4
Safety rules for correct use
Double insulation for additional protection
Please read the instruction manual before use.
CE conformity.
Wear safety glasses, hearing protection and a dust mask.
Waste electrical products must not be disposed of with household
waste. Please recycle at the appropriate facilities. Check with your local
authority or retailer for recycling advice.
Security alert. Use only accessories supported by the manufacturer.
Additional security warnings
•
Use the machine for dry sanding only. Never use this sander for wet sanding or
liquid polishing. Failure to follow this rule may result in risk of electric shock.
•
The penetration of water into the machine increases the risk of electric shock.
• Apply the machine to the workpiece only when it is turned on and turn the
machine off only after it has been lifted from the workpiece. The power tool can
move suddenly.
•
Never touch sandpaper during operation, risk of injury.
•
Make sure the work piece is firmly supported to prevent it from moving.
• Never stop the sander by applying force to the base plate.
•
Use only sandpaper in good condition. Do not use torn or worn sandpaper.
• Never use the machine with a damaged cable or touch the damaged cable.
•
Do not sand materials that may cause health problems or fire or other hazards
(such as magnesium, asbestos, lead-based paint, etc.).
•
Keep your attention on the work and the tool at all times.
• Do not allow people to enter the work area without wearing adequate PPE.
•
Whenever possible, seal off the work area to contain dust for later disposal.
•
Make sure that the supply is the same as the voltage indicated on the nameplate.
• Remove plug from outlet before making any adjustments or servicing.
•
Always inspect and remove all nails, screws, etc. of the wood before sanding.
• Avoid overheating the object being sanded as well as the sander.
•
Always empty the dust collector before taking breaks.