7
•
Speed should only be maximized after it has been fully immersed in the mix, to
ensure the motor stays as cool as possible.
•
The machine must move within the mixing container during the mixing process.
•
Continue the mixing process until all components of the mixture have been
processed. Always clean the mixer after you have finished using it.
Maintenance
Maintenance
•
Remove the plug from the outlet before performing any adjustment, service or
maintenance.
•
Your power tool does not require additional lubrication or maintenance. Always
store your power tool in a dry place.
•
If the power cord is damaged, it must be replaced by the manufacturer, its official
dealer, or similarly qualified persons to avoid a hazard.
•
There are no parts installed inside the unit that require maintenance.
Cleaning
•
Keep safety devices, ventilation slots, and motor housing as free from dirt and
dust as possible.
•
Clean the unit by wiping it with a clean cloth or clean it with low pressure
compressed air.
•
We recommend that you always clean the unit immediately after use.
•
Clean the unit regularly by rubbing it with a damp cloth and a little mild soap. Do
not use cleaners or solvents; These will attack the plastic parts of the unit.
•
You should also make sure that water does not get inside the unit.
Carbon brushes
•
If excessive sparking occurs, you should have a qualified electrician check the
carbon brushes.
•
They must be changed by qualified personnel.
Attention
Only qualified personnel can change the brushes.
