2
Security instructions
Caution
Read all safety warnings and all instructions. Failure to follow all warnings and
instructions can result in electric shock, fire, and / or serious injury.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
Note: Save all warnings and instructions for future reference.
1) Work area safety
a. Explosive gases: avoid flames and sparks, make sure the workplace is
well ventilated during charging.
b. The load contains components such as the switch and the fuse that can
cause arcing and sparks. Make sure the garage or room is well ventilated.
c. For indoor use, do not expose to rain or moisture.
d. Do not place the charger on a hot surface.
e. There is an acute risk of explosion if there is a gas odor. Disconnect the
charging clamps, ventilate the room immediately and completely, have a
dealer inspect the charger.
2) Electrical safety
a. The charger is designed for 12V and 24V lead acid batteries.
b. Never use the device to charge non-rechargeable batteries or defective
batteries.
c. Do not charge multiple batteries simultaneously.
d. Do not short-circuit the charging clamps.
e. This charger is not suitable for maintenance-free batteries.
f. Never use the cord for any other purpose than its intended use.
g. Indicate the polarity correctly, the anode is red / sign (+), the cathode is
black / sign (-).
h. Voltage spikes can damage electronic components. Therefore, it is
advisable to disconnect the battery from the system during charging.
3) Personal security
a. Wear goggles and gloves when charging the battery. There is a high risk
of injury from corrosive acid.
b. To avoid sparks due to electrostatic discharge, never wear clothing made
of synthetic materials when charging the battery.
c. Keep children and pets away from the battery and charger.
d. Battery acid is corrosive. If acid is splashed on your skin or clothing, wash
it off immediately and consult a doctor if necessary.
e. Wear acid-proof gloves and safety glasses whenever you connect the
battery, charge it, and whenever you add acid or refill with distilled water.
4) Use and care
a. The power cable and the charging cables must be in perfect condition.
b. Keep the ventilation slots free of dirt.
c. Do not carry the appliance by its cord and never pull the cord to remove
the plug from the socket. Protect the cord from heat, oil, and sharp edges.
d. Keep the terminals clean and protect them from corrosion.
e. If the fuse next to the charge current indicator blows, replace it with a fuse
of the same amperage.
Содержание TBC1601
Страница 1: ...1 V BATTERY CHARGER EN...
Страница 9: ...9 Exploded view...
Страница 10: ...10 ELECTRIC SANDER BATTERY CHARGER...