Total TABLI2002, Руководство пользователя

Страница: 2 / 12

2
Security instructions
Warning
Read all safety warnings and all instructions. Failure to follow warnings and instructions
may result in battery discharge, fire, and/or serious injury.
Save all warnings and instructions for future reference.
Note: The term “battery tool” in the warnings refers to your battery-operated (cordless) battery
tool. Due to our ongoing R&D&I program, the specifications in this document are subject to
change without notice.
1) Work area safety
a. Keep the work area clean and well lit to prevent accidents.
b. Do not use battery tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust that can cause fires.
c. Keep children and other unauthorized persons away while using a battery
tool. Distractions can cause you to lose control of the tool.
2) Electrical safety
a. The plugs for charging the battery of the P20S tools must match the outlet.
Never modify the plug in any way. Using a suitable plug reduces the risk
of electric shock.
b. Avoid bodily contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if
your body is grounded.
c. Do not expose battery tools to rain or wet conditions. Water entering a
battery tool will increase the risk of electric shock.
d. Never use the cable to carry, pull or unplug the battery charger. Keep the
cable away from heat or oil.
e. If using the tool in a wet location is unavoidable, use a Residual Current
Device (RCD) protected supply to reduce the risk of electric shock when
charging the battery.
3) Personal security
a. Always stay alert, watch what you are doing and use common sense
when using the tool.
b. Do not use a battery tool if you are tired or under the influence of
medication or other substances.
c. Wear personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non-slip safety shoes, hard
hat, or hearing protection used in the proper conditions will reduce
personal injury. Also don't wear loose clothing or jewelry.
d. Prevent the tool from turning on unintentionally. Make sure the switch is
in the off position before connecting to battery or moving.
e. If devices are used for dust extraction and collection, make sure they are
properly connected. Properly use these devices and you will reduce dust-
related hazards.
f. Don't overdo it. Maintain posture and balance at all times. This allows for
better control of the power tool in unexpected situations.