6
LED SILICONE NEON FLEX
NSR2-6MD-H
06
Screw the aluminum track to
the installation position.
Then slowly press the tape
light into the aluminum track.
The tape light is flatly and
firmly stuck on the aluminum
track.
cuttable identifier
Do not use in convex direction
Neat and smooth cut
Insert a stick on the reel
and place it on the packing
box,and rotate the reel to get
the product.
Do not use in concave direction
Do not make irregular cuts.
Attentions
3. Operation details of installation card
At welding part, note the positive and negative poles of lines and board and the
corresponding colors on the board; positive to positive and negative to negative
1.
Each connection point must use 10g silica gel, and treat waterproof and
insulation well;
2.
The screw of installation card must perpendicular to installation surface and be
fastened, as shown in the right.
3.
Note:
Can be bend left and right
Do not use in distortions
