7.
Product
Specifications
Model Name
: BlueJay
Bluetooth Compliance : Bluetooth Specifications version 1.2
Supported Profiles
: Headset and Handsfree
Frequency Band
: 2.4GHz ISM Spectrum; frequency hopping 79 channels
Modulation
: GFSK (Gaussian Frequency Shift Keying)
RF Power
: Class 2, 0-4dBm
Operating Range
: Up to 10m (open area)
Talk Time*
: Up to 5hrs
Standby Time*
: Up to 240hrs
Connection
:
Point-to-Point
Security
: Security mode 3 (pairing, encryption, authentication)
Power Source
: Rechargeable Li-Polymer 180mAh; replaceable
Charging
: Universal Adaptor 5V/200mA
Charging Time
: Up to 2hrs
Compatibility
: Mobile phones supporting Bluetooth 1.1 (and above) specifications;
Headset and/or Handsfree profiles
Dimension
: 64.0Lx26.0Wx17.0H mm (TBC)
Weight
: 25g (TBC)
* may vary based on users’ operating mode, make and model of phones
FCC
Compliance
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
No special accessory is required to enable the equipment to comply with the emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received; including interference that may cause
undesired operation.
