Total Source TRSM0004, Руководство по эксплуатации

Страница: 19 / 32

19/32
3. Adjustments of the operating lever
Adjustment of neutral position:
1. Place the operating lever in the normal position.
2. Push the tiller handle into the lowest position.
3. Regulate the adjuster nut and screw on the linkage so
that, when the tiller handle is pumped, the forks neither
raise nor lower.
Adjustment of lifting position:
1. Place the operating lever in the lifting position.
2. Pump the tiller handle; the linkage is not operated,
the forks raise and tilt while the release valve remains
completely closed.
3. If the forks do not lift or tilt, regulate the adjuster nut
and screw until a normal lifting and tilting action is
attained.
Adjustment of lowering position:
1. Pull the operating lever in the lowering position.
2. The linkage is operated, causing the release and
pressure valve to open completely, and the forks to
lower.
3. If the forks don’t lower, regulate the adjuster nut and
screw until a normal lowering action is attained.