11/24
2. Take the lever and position it above the
pump. Make sure the handle is in the
correct position, the lever on the handle
should be on the right. Insert the axle in
the pump through the holes in the pump
and the holes of the lever, from right to
left.
3. Take the chain in the lever and run it
through the hole in the axle. Attach the
chain to the lever of the lowering valve.
4. Remove the strap around the safety pin
and pump so that the safety pin falls out.
5. Make sure the hole in the axle fits the
hole in the pump. You can use a hammer
to do this.
6. Insert the split pin in the hole to secure
the lever to the pump.
7. If the pump functions unsatisfactorily:
loosen the nut and adjust by tightening
or loosening the screw. After
performing the adjustment, retighten
the nut.
8. The pallet truck is now ready to use!
TotalSource-TRP0029-TRP0030_MANU_EN_12901925.indd 11
TotalSource-TRP0029-TRP0030_MANU_EN_12901925.indd 11
15/12/2020 16:06
15/12/2020 16:06
