background image

17/28

2. Cleaning

•  Clean as needed and wipe with an oily cloth.

•  When you use a high-pressure cleaner, do not direct the jet onto the bearings and 

seals, otherwise the grease will be washed out and the lifespan of the machine will be 

shortened.

•  Never use sandpaper or abrasive material on the jack!

This maintenance may be carried out by the operator.

3. Lubrication

A periodic coating of lubricating oil on pivot points will help to prevent rust and assure that 

the pump assemblies move freely.

This maintenance may be carried out by the operator.

Lubrication points

Please see pictures below for the pivot points that need a periodic coating of lubrication.

Use a non-abrasive grease to lubricate the mechanical parts. We recommend 

REF 107TA8448 as it is water-repellent and resistant to weather influences.

4. Changing oil

For the best performance, change the complete oil content at least once a year.

•  Make sure the saddle is fully lowered.

•  Remove the oil filter plug.

•  Lay the jack on its side.

•  Now drain the fluid.

•  Once the reservoir is empty, fill it with oil until it’s just below the rim of the oil filter hole.

•  Reinstall the oil filter plug. For the best results we recommend using REF 107TA7212, 

hydraulic oil ZS15.

•  Check if there is no air in the pump (see pump bleeding instructions).

This maintenance may be carried out by the operator.

Содержание KRIG001





























Отзывы: