www.totalsheds.co.uk
Page 3 of 3
7a. Now fix your 6” Brenton Bolt Lock to
secure your sheds access.
Apply as shown with fittings provided .
Look at diagram 7a.
For best results please check the sheds
structure for any lose sections or areas
that need extra support. This is to ensure
that your shed is fully secure and has no
areas that will compromise the stability of
your finished shed.
6a. Once the roof felt is correctly
applied place the felt strips provided to
finish of the roofing for the shed.
Use screws provided to secure the felt
strips as shown in diagram 6a.
PLEASE NOTE: Felt strips may need to
be cut down to size.
Ready to Assemble Sheds
• Drill Driver
• Drill Driver
• Hammer
Use hammer to
tack in felt to place
as shown in diagram along
white dotted lines.
5. Complete Roof Felt
6. Apply Felt Strips
50mm S
cr
ew
s
6a
7. Finishing Touches
You now have your completed shed.
7a
Total Sheds
28 Charles Street,
Willenhall, WV13 1HG
Tel: 01902 636 529
Email: [email protected]
TOTAL SHEDS
PRESSURE TREATED TIMBER
5a. Remember to apply the lower section
felt first then the top layer from along the
highest point as shown in the diagram.
Cut any excess felt and tuck under
roofing edges and secure using felt tacks
provided.
Bottom Layer 1st
Top Layer 2nd
7a
