— 10 —
— 3 —
PRODUCT SPECIFICATIONS
Handle
Glideboard
Assembly
Lower
Rail
Upper
Right Rail
Tube Roller
Cable
Center Support Rail
Round
End Cap
Back Crossbar
Front
Crossbar
Squat
Stand
Leg Pulley Accessory Kit
Wing Attachment
Vertical Column
Leg Pulley Bracket
Flip Chart/Water
Bottle Holder
Flip Chart
Stand
Spring Loaded Pin
(located on side of
Height Adjustment
Assembly)
Upper
Left Rail
Hitch Pin w/Lanyard
Rope
Pulley/D-Ring
Assembly
Clip
Foam
Pad
Grip
M8 x 80mm
Hitch Pins
Brackets
10mm & 13mm
Hex Wrench
M8 x 60mm
Hitch Pins
M8 x 80mm
Hitch Pin
Clip
Foot
Harness
LENGTH:
folded 45-1/4”
in use 80-3/4”
HEIGHT:
folded 7”
in use 37-1/2”
Leg Pulley
Bracket
For use with
leg pulley
accessory only.
Allen
Wrenches
Packed in the leg pulley
accessory kit
Stopper
Height
Adjustment
Assembly
Adjustment
Pin
“C” Pin
WARNING
LABEL 3
WARNING
LABEL 1
WARNING
LABEL 2
WARNING
LABEL 4
CAUTION
LABEL 1
CAUTION
LABEL 2
WARNING
LABEL 3
WARNING
LABEL 5
INSPECTION, MAINTENANCE & STORAGE
INSPECT YOUR TOTAL GYM
®
POWER PLATINUM PRIOR TO EACH USE
Before using your Total Gym
®
Power Platinum for your workout session, be sure to make the
following inspection:
•
Make sure the equipment is fully opened and sitting on a solid, level surface with plenty of
clearance on all sides. Unit should be used on a mat or on carpeted surfaces only.
•
Make sure all the Pins are securely in place and locked into position.
•
Check that the Pulley is attached securely to the loop on the top underside of the Glideboard.
•
Check that the Cable is traveling correctly in the groove of each Pulley.
•
Make sure the Cable is securely fastened to each Handle.
•
Check that the Wing Attachment or other accessories are installed correctly when in use.
•
Make sure the Glideboard is gliding smoothly along the Rails.
ROUTINE MAINTENANCE
•
Wipe down your Total Gym
®
Power Platinum on a regular basis using a clean cloth and alcohol
or alcohol-based products like Windex
®
or 409
®
. Do not leave towels or workout clothing laying
or hanging on the equipment.
•
Periodically check the following parts for signs of fraying or other wear: the Cable, Pulleys,
Wheels, Glideboard, accessories and Rails. If the Cable, Pulleys, Rails or Wheels need
replaced – do not use your unit, wait until the part is replaced. If any other part than the ones
listed above needs to be replaced, do not use that part until it is replaced.
•
Never use a lubricant such as WD-40
®
or ArmorAll
®
to lubricate or clean the unit. Use only
3-in-1
®
oil or machine oil to lubricate the axles of the wheel or pulley, not the roller surface.
TO STORE YOUR TOTAL GYM
®
POWER PLATINUM
Follow these easy steps to store your exerciser properly:
1.
Remove all accessories and attachments.
2.
Be sure the Pulley is attached to the underside of the Glideboard for folding.
3.
Remove “C” Pin located at the bottom of the Vertical Column.
4.
Position one foot on Back Crossbar to keep the unit from lifting off the floor. With one hand on
the Rail, grasp the Hitch Pin with Lanyard and pull it out from the Vertical Column. Slowly lower
the Rails until they rest on the Back Crossbar.
Stopper Assembly Kit
Ab Crunch Board
WIDTH:
14-1/4”
WEIGHT:
55 lbs.
MAXIMUM
USER WEIGHT:
275 lbs.
Includes
Workout
DVD