Total Gym JUMP TRAINER, Руководство пользователя

Страница: 11 / 16

11
TOTAL GYM
®
JUMP TRAINER
TM
OWNER’S GUIDE | ASSEMBLY & INSTALLATION TOTAL GYM
®
JUMP TRAINER
TM
OWNER’S GUIDE | ASSEMBLY & INSTALLATION
ASSEMBL
Y & INST
ALL
STEP 12. Move the Jump Trainer to the
permanent location and position it properly
for full function.
To ensure you have positioned the Jump
Trainer with enough clearance before
bolting to the floor, first lower the Incline
Strut to the lowest level. From the Floor
Anchor Bolt Holes measure at least 104
inches [3.56 m] from the Bolt Holes
behind the machine to any walkway, or at
least 140 inches [3.56 m] away from any
wall or obstruction.
Bolt down machine at Front Base through
the Bolt Holes provided on the Anchor
Feet.
This will warrant enough room for full
range of motion of the Glideboard at the
rear of the unit.
NOTE:
There should also be at least 3 feet
(1 meter) distance between the Rear Base
and a wall or walkway. Consult your local
government guidelines.
STEP 13. Anchor the Front Base to the floor using appropriate bolts for your floor as
shown below.
Minimum distance from Floor Anchor Bolt Holes to a wall: 140 inches [3.56 m]
1. MACHINE WILL MOVE IN-USE IF NOT BOLTED TO THE FLOOR
2. Bolt unit 104 inches [2.64 m] from the Bolt Holes to any walkway behind the
machine or at least 140 inches [3.56 m] from any wall or obstruction.
WARNING!
Bolt
Down
Here
Minimum
walkway:
3 feet (1 meter).
See Note above.