THANK YOU
Thank you for purchasing the TOTAL CONTROL Signal Amplifier. TOTAL CONTROL
continuously strives to develop, produce and market high-quality innovative products to
meet your needs. We hope this Signal Amplifier will give you total satisfaction.
THE PRODUCT
The TOTAL CONTROL Signal Amplifier is designed to boost the signals of your aerial or cable
box, this allows you to distribute the signal to multiple devices and/or use longer
cable/cables without losing picture and sound quality.
Below you’ll find the description of your TOTAL CONTROL Signal Amplifier (see picture 1).
CONNECTING THE SIGNAL AMPLIFIER
To connect your TOTAL CONTROL Signal Amplifier, please follow the steps below.
•
Connect your TV or other device to the signal output (C)
•
Connect your aerial / cable TV coaxial cable or other device (see picture 3) to the input
(B) on the TOTAL CONTROL Signal Amplifier.
•
Plug the TOTAL CONTROL Signal Amplifier into the mains (A) and switch it ON (D).
As situations vary, please find some different examples of use (pictures 2 – 5):
An aerial coaxial cable (DVB-T / DVB-T2 / Freeview) or cable TV coaxial cable (DVB-C /
DVB-C2) is connected to the INPUT of the TOTAL CONTROL Signal Amplifier. The signal
will be boosted and distributed to one TV or other device.
The coaxial output of a TV receiver (DVB-T / DVB-T2 / Freeview / DVB-C / DVB-C2) is
connected to the INPUT of the TOTAL CONTROL Signal Amplifier. The signal will be
boosted and distributed to one TV or other device.
An aerial coaxial cable (DVB-T / DVB-T2 / Freeview) or cable TV coaxial cable (DVB-C /
DVB-C2) is connected to the coaxial input of a TV receiver which is connected to the
HDD / DVD recorder. The coaxial output of the HDD / DVD recorder is connected with
the INPUT of the TOTAL CONTROL Signal Amplifier.
The signal will be boosted and distributed to one TV or other device.
FM aerial is connected to the INPUT of the TOTAL CONTROL Signal Amplifier which will
boost the signal and distribute it to up to one radio tuner.
(*) It may be possible that you have to use inline coax-connectors to make the connections.
(See picture).
HELPFUL HINTS
If the picture or sound quality is unsatisfying, please follow the helpful hints below.
•
If the incoming signal is unclear, the TOTAL CONTROL Signal Amplifier will not improve
your picture as it will also amplify the noise in the signal. Please contact your aerial /
cable TV installer for further details.
•
Check all the connections. Loose or bad connections will result in an unclear picture.
*
2
STB
5
4
3
D
1
TV
TV
STB
TV
HDD / DVD
recorder
RADIO
A.
Fixed Power plug
B.
Signal input
C.
Signal output
D.
ON / OFF switch
1
2
3
4
5
B
C
A
SV_1301_Opmaak 1 10-05-16 09:04 Pagina 2
