Tosot GWH09AGA-K6DNA1A, Руководство пользователя

Страница: 12 / 32

●
●
●
●
low-medium speed,medium speed,medium-high spe-
ed,high speed.
●
●
●
●
●
Notice
Notice
Notice
Introduction for buttons on
remote controller
For preventing cold air, after starting up heat mode,
indoor unit will delay 1~5 minutes to blow air (actual
delay time depends on indoor ambient temperature).
Set temperature range from remote controller:
16~30
℃ (61-86 ℉ ). Fan speed: auto,quiet,low speed,
button can adjust fan speed. Press " " / " " butt on
can adjust fan blowing angle.
After selecting cool mode, air conditioner will opera
te
under cool mode. Cool indicator " " on indoor unit
is ON. (This indicator is not available for some models.)
Pre ss "▲ " or button to adjust set temperature.
Press "FAN" button to adjust fan speed. Press " " /
" " button to adjust fan blowing angle.
This is a general use remote controller. It could be
used for the air conditioner with multifunction. For the
functions which the model doesn't have, if press the
corresponding button on the remote controller, the
unit will keep the original running status.
After putting through the power, the air conditioner
will give out a sound. Power indicator "
" is ON.
After that, you can operate the air conditioner by
using remote controller.
Under on status, pressing the button on the remote
controller, the signal icon " " on the display of
remote controller will blink once and the air condition-
er will give out a
"
di
"
sound, which means the signal
has been sent to the air conditioner.
When selecting dry mode, the air conditioner operates
at low speed under dry mode. Dry indicator " " on
indoor unit is ON. (This indicator is not available for
some models.) Under dry mode, fan speed can’t be
adjusted. Press " " / " " button to adjust fan blowing
angle.
When selecting fan mode, the air conditioner will only
blow fan, no cooling and no heating. All indicators are
OFF. Press "FAN" button to adjust fan speed. Press
" " / " " button to adjust fan blowing angle.
Press " " / " " button to adjust fan blowing angle.
(Cooling only unit won’t receive heating mode signal.
If setting heat mode with remote controller, press ON/
OFF button can’t start up the unit).
Press this button to turn on the unit. Press this
button again to turn off the unit.
AUTO COOL DRY FAN HEAT
Press this button to select your required operation
mode.
MODE
ON/OFF
When selecting auto mode, air conditioner will operate
automatically according to ex-factory setting. Press "FAN"
FAN
When selecting heating mode, the air conditioner oper-
ates under heat mode. Heat indicator " " on indoor
unit is ON. (This indicator is not available for some
models.) Press " ▲ " or button to adjust set temper-
ature. Press "FAN" button to adjust fan speed.
TURBO
Under COOL or HEAT mode, press this button to turn
to quick COOL or quick HEAT mode. " " icon is dis-
played on remote controller. Press this button again to
exit turbo function and " " icon will disappear. If start
this function, the unit will run at super-high fan speed to
cool or heat quickly so that the ambient temp.approachs
the preset temp. as soon as possible.
,
This button is used for setting Fan Speed in the
sequence that goes from AUTO,
, , ,
, to , then back to Auto.
Under AUTO speed, air conditioner will select proper
fan speed automatically according to factory default
setting.
It
'
s low fan speed under dry mode.
X-FAN function: Holding fan speed button for 2s in
cool or dry mode, the icon
" "
is displayed and the
indoor fan will continue operation for a few minutes in
order to dry the indoor unit even though you have
turned off the unit. After energization, X-FAN OFF is
defaulted. X-FAN is not available in auto, fan or heat
mode.
This function indicates that moisture on evaporator of
indoor unit will be blowed after the unit is stopped to
avoid mould.
Having set X-FAN function on: After turning off the
unit by pressing ON/OFF button, indoor fan will
continue running for a few minutes at low speed. In
this period, hold fan speed button for 2s to stop
indoor fan directly.
Having set X-FAN function off: After turning off the
unit by pressing ON/OFF button, the complete unit
will be off directly.
▲
" "
▲
" "
7