TOSO CREATY CORD TWIN KIT Скачать руководство пользователя страница 8

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

* To operate the screen, hold the cord 
stopper or operation cord and pull it 
directly downward. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 Safety Joint

 

 
 
 
 
 

 The safety joint is intended to release the 

operation cord to avoid danger in the event that the 
cord becomes caught around the child’s neck or 
body. 

 The safety joint will come apart if force is applied 

to the cord or if the cord is held near the joint in 
operation.  If the safety joint comes apart for any 
reason, do not leave it in this condition, but instead 
of make sure to reconnect it before using the 
screen. 

 
 
 
 
 
 
 
 
 
 
 
 

 

 Removing Fabric

 

* Before removing the lift cord from the cord adjuster, place a mark on the cord (at the 
top end of the cord adjuster) using a pen.  The mark will serve as a guide when 
winding up the cord later, allowing for easy reinstallation.    Be very careful not to stain 
the fabric with the pen. 
 
1   Lower the fabric fully. 
 
2    Unwind the lift cord from the cord adjuster 

at the bottom and remove the cord 
adjuster from the looped tape. 

* Keep the cord adjuster in a safe place to 
avoid loosing it. 
 
 

How to Operate

 

 

 

Be sure to raise and lower the screen using the operation cord. 

 

When lowering the screen, make sure to hold the cord by hand.    If you 

release your hand from the cord, the screen may drop abruptly, posing a 

danger. 

ATTENTION 

 

 
 

 

Do not allow children to play with the operation cords.  An accident may 

occur in the event the cord is caught around the child’s neck or body.

 

WARNING 

 

 

 

Cleaning

 

 Check the label for handling instructions affixed to the back of the fabric. 

 I the fabric comes with a label of pictorial washing instructions, follow the 

instructions provided on the label 

 If the fabric comes with a label indicating method for care, follow the instructions 

provided on the label. 

Care of the fabric 

* After removing the fabric from the head rail, be sure to bundle and tie the cords 
to ensure that they will not fall out of the cord guides.

 

Lift Cord   
(Front Screen)

Lift Cord   
(Rear Screen)

Cord Stop 
(Front Screen)

Cord Stop 
(Rear Screen)

Operation Cord

Cord Separator

Cord Separator

Do not operate holding cord separator 
in order to operate normally. 

-14- 

-15-

Содержание CREATY CORD TWIN KIT










Отзывы: