Connect the USB cable between the
modem and a TOSIBOX
®
Lock. Power is
supplied from the Lock via USB.
Remove the protective caps from antenna
connectors ANT 1 and ANT 2. Connect
and use always BOTH antennas delivered
in the sales package. If possible arrange
antennas in 90 degrees angle with each
other. In case where accessory antenna
cables and omni-directional antennas
are used (not included), have the
antennas mounted in a vertical position
and at least 50 cm separated. This will
maximise the wireless performance.
Check the LED status indicator:
• the LED does not illuminate > the modem is not powered
• steady blink > normal operation
• fast blink > data transmission
Check modem compatibility from
https://www.tosibox.com/products/4g-modem
Normal AT commands can be used with RS-232 connection.
Visit https://www.tosibox.com/support/
for more information.
5
6
7
Your Authorized Distributor is: Controller Service and Sales - www.controllerservice.com - [email protected] - (800)584-5565