Main features
One 1 Gbit/s WAN port
Four 1 Gbit/s LAN ports
Over 700 Mbit/s encryption throughput
1000 concurrent remote connections per LAN network
Encryption and authentication PKI, 3072 bit RSA
Data encryption TLS, AES-256-CBC / Blowfish-128-CBC
Mirrored hard disks (RAID 1)
Physical properties
1U (rack unit) for 19” rack cabinet (rack rails included)
Length 570 mm / width 430 mm / height 43 mm
Net weight, a accessories: 12.0 kg
Sales package gross weight: 15.0 kg
Environmental conditions
Operational temperature 10°C … 30°C
Humidity 20% … 80% non-condensing
Power consumption max 250 W
Input voltage 90 … 264 V AC
Input frequency 47 … 63 Hz
US Patents
US8831020
Patents pending: US14/119753, US14/370872, US14/390153
TOSIBOX
®
Central Lock installation guide
Finland
[email protected]
[email protected]
Sales, Finland Tel. +358 447090100
Sales, International Tel. +358 447090200
www.tosibox.com
10/2015
Plug
&
Go
TM
Connectivity
Finland
[email protected]
[email protected]
Sales, Finland Tel. +358 447090100
Sales, International Tel. +358 447090200
www.tosibox.com
EN / V.1.01.
CE Notice
This product has been determined to be in compliance with 2006/95/EC (Low Voltage
Directive), 2004/108/EC (EMC Directive) and amendments of the European Union.
European Union, Class A
Warning: This is a Class A product. In a domestic environment this product may cause radio
frequency interference in which case the user may be required to take adequate measures.
Industry Canada, Class A
This Class A digital apparatus complies with Canadian ICES-003.
UL approval
This equipment is UL Listed Information Technology Equipment with UL file number E105106.
FCC Notice (U.S. only)
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the manufacturer´s instruction manual,
may cause harmful interference to radio communications. Operation of this product in
a residential area is likely to cause harmful interference, in which case you will be required
to correct the interference at your own expense. This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference
• This device must accept any interference received, including interference that may cause
undesired operation.
These limits are designed to provide reasonable protection against harmful interference in
a non-residential installation. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between this equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for additional suggestions.
WAN
SERVICE
AC POWER
LAN1 LAN2 LAN3 LAN4
Central Lock backside connection ports
