AV connection
Back
Digital input-1
EXT 4
Digital input-2
EXT 2
EXT3 input
AV
EXT3 output
EXT 1
AV connection
Back
Digital input-1
EXT 4
Digital input-2
EXT 2
EXT3 input
AV
EXT3 output
EXT 1
Input selection and AV connections
16
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 5
for a clear view of the back connection recommendations.
Select
AV connection
.
Use
S
or
R
to change the
EXT3 output
option to:
MONITOR
= The picture on screen.
TV
= The last television programme selection.
EXT 1
= The picture from equipment connected
to Scart 1.
EXT 2
= The picture from equipment connected
to Scart 2.
EXT 5
= The picture from equipment connected
to the front input sockets.
This specifies the type of signal going into Scart 3 (
EXT3
)
on the back of the TV. Please refer to the manufacturers
instructions for the connected equipment.
From the
Feature menu
select
AV connection
and with
S
or
R
select either
AV
or
S-VIDEO
as
the required
input
for
EXT3
.
If the colour is missing try the alternative setting.
This enables selection of the source to
output
from
Scart 3. For example, to record transmissions in stereo
from a stereo decoder – connect a stereo decoder to
Scart 1 and stereo VCR to Scart 3, then select
EXT 1
as
the
EXT3 output
. The signal received through Scart 1 will
output directly through Scart 3.
Most VCRs and decoders send a signal through the Scart
lead to switch the TV to the correct
Input
socket.
Alternatively press the external source selection button
B
until the picture from connected equipment is shown.
This button must be used to view equipment connected
using the COMPONENT VIDEO INPUT (
EXT4
).
Digital Audio
on the screen indicates that the external
source has been set as a digital audio input. An
S
e.g.
EXT3S
, indicates the input is set for an S-Video signal.
Input selection – Digital Audio signal
Input selection – Video signal
Output selection – signal for Scart 3
1
1
1
2
2
This set is provided with 2 digital audio inputs – DA-1 and
DA-2 – so that equipment can stay permanently connected.
For example
: connect the video signal from a DVD to the
Component Video Input (
EXT4
) and from a games
console to Scart 2 (
EXT2
), connect the audio cables to the
inputs on the back of the set. Match the two up as follows:
If DA-1 (optical) has been connected to the DVD
player, select
AV connection
from the
Feature
menu
and press
Q
to highlight
Digital input-1
,
then press
S
or
R
to select
EXT 4
.
AV connection
Back
Digital input-1
EXT 4
Digital input-2
EXT 2
EXT3 input
AV
EXT3 output
EXT 1
For the second connection, press
Q
to highlight
Digital input-2
(coaxial), then
S
or
R
to select
EXT 2
for the games console.
K7815 32/36ZP38B 17/3/03 3:49 pm Page 16
